3 Ways to Gather Fabric

February 6, 2013 in News, Tips & Tricks

If you are new to sewing  and want to learn how to gather fabric or want to check out some extra gathering tips, read on!

il_fullxfull.224340340

Here are 3 detailed methods of gathering!

Baste Stitching 2 Rows

Zig-Zag over a Ribbon or Heavy Thread

Gathering with a Serger

First, we have the most common method of gathering (used more for lightweight to medium fabrics).

Baste Stitching 2 Rows

If you have a sewing machine that cuts your thread with a scissors button (or your bobbin thread does not typically need to be pulled up) so that your top thread is the only one above the needle plate, you’ll need to first pull your bobbin thread up (and resist the urge to use the scissor button). To raise your bobbin thread, with your presser foot up, hold onto your top thread.
IMG_1917

Use your handwheel or your needle up/down button to lower your needle and then, press again to raise it (all the while holding your top thread, not too tight to allow the top thread to go around the bobbin case). After your sewing machine has made one rotation, gently tug on the top thread.

IMG_1919

Whether your bobbin thread comes up short or long, pull it up and out as long as your top thread. You need long threads at the beginning and end of your soon-to-be stitch lines to assist in the gathering process.

IMG_1921

Set your stitch length to 5.0. My standard needle position is to the left, so I moved my needle in a little by changed my “width” (which, in the straight stitch mode only moves the needle over) to 1.0mm so that when I actually stitch my gathered piece to something my basting stitches hide within that 1/2″-5/8″ seam allowance (depending on what you are sewing). Disregard the 4.0 tension, that is standard and has not been adjusted for my machine.

IMG_1923

Now, line your foot up with the edge of the fabric. WITHOUT backstitching, stitch a long basting stitch down your edge with your fabric even with the edge of the foot as your seam guide. Do not backstitch at the beginning or the end. And when you get to the end, lift your needle up to the highest position, lift your foot up, then draw your fabric out and cut the tail of your thread about 6.”

IMG_1925

Here is my first basting line…
IMG_1926

IMG_1929

Now, I changed my needle back to the left and lined my first baste line up with the left side of the foot to stitch a second basting stitch (make sure your stitch length is still at 5.0mm).IMG_1931

Stitch your second baste line; don’t forget to start and end with a long tail of threads and don’t backstitch. Also, make sure that your stitch lines do not cross each other.

IMG_1933

Here are my 2 basting stitch lines with 4 long tails at the ends of both stitch lines.IMG_1934

I like to tie all 4 threads together at one end only (and only if I’m gathering a shorter piece of fabric; if I’m gathering an entire adult skirt waist or something, I leave both ends open so that I can gather from both ends) so that I don’t end up just pulling my stitches right out as I am gathering.

IMG_1937

You will, then, flip your fabric over so that you are working with the bobbin thread (it, without a doubt, gathers more easily than the top thread) pull your fabric over the bobbin thread (hang on to the 2 bobbin thread strands as you pull the fabric in the opposite direction). It should start scrunching. Whatever you do, do not pull the bobbin threads and then pull the top threads, you’ll lock it up (and sometimes that means taking your stitches out and starting over).

IMG_1938

Pull your fabric to your desired gathered fullness.

IMG_1940

When I’ve reached my desired fullness or gathered length (like if my gathered fabric needs to match the length of another flat piece that I am sewing it too, like in this Diaper Bag Tutorial, I like to lock the other end, you can just tie off the 4 threads like we had on the other end, or here is another way to knot without gathering any of your side seam allowance into it…

IMG_1941

You can pull your bobbin thread to pull the top thread up in loops.IMG_1944

Pull those loops completely up and out so that all 4 threads are on the same side of fabric.IMG_1945

Now, knot all 4 threads together (picture below P.S. statement). Done! Gathered! Accomplishment!

P.S. I have tried cutting corners and only stitched 1 baste line instead of 2 and: A. The gathers don’t lay down as nicely, making it a little bit more difficult to work with and, B. The gathering process isn’t as strong, so you are only pulling one thread and there is a high risk that your pull thread will break…done it, multiple times…in fact, on long gathered edges…the worst…you have to take your stitches out and start back over! I, now, baste 2 lines every time when I gather this way! 😀IMG_1946

This second method works very well with heavier fabrics!

Zig-Zag over a Ribbon or Heavy Thread

IMG_1895

The above picture represents my eventual seam allowance (the red line) as if I were sewing this gathered piece to something (sewing a gathered piece to a flat fabric piece is shown in this Diaper Bag Tutorial), you can stitch this line in a thread that exactly matches your fabric if you like, but, it’s not necessary (I just thought it would be a great visual aid in this tip). I zig-zag stitched over a 1/8″ ribbon onto a stiff canvas and it worked really well (you can use something like a jeans thread, as well). I used a braiding foot (and BTW it was AWESOME) to aid in keeping my ribbon in the middle so that I didn’t accidently sew onto the ribbon defeating the purpose because the ribbon needs to move freely underneath our stitch (but, you can use a regular foot, just make sure as you are zig-zagging, do not stitch onto your ribbon/thread). The next 3 images show the braiding foot and how the ribbon is inserted; you can see that the ribbon is threaded through the foot opening, underneath the foot and about 2″ behind the foot. If you are using a regular machine foot, just place the ribbon or heavy thread underneath the foot as centered as possible, extending 2″ behind the foot.


IMG_1901 IMG_1900 IMG_1899

I lined my seam allowance red line up with the inside of the foot. Regardless, wherever you zig-zag, you want your zig-zags to be within a 1/2″ of the fabric edge so that your zig-zags do not show when sewn to another fabric piece. Set your zig-zag stitch to the highest stitch width (7.0mm on my Baby Lock Quilter’s Choice, which is now the Baby Lock Melody) and I left my stitch length at 1.4 (standard machine setting), but you can set it higher if you want chunkier gathers. Now zig-zag over your ribbon, backstitching at both ends (so that when you gather, your end stitches don’t pull out).

IMG_1902IMG_1903

Notice that my zig-zags do not cross my eventual seam allowance line, but are very close to it.

IMG_1907

After zig-zagging, I straight stitch reinforce over one end of the ribbon if I’m gathering a short piece (if I’m gathering a really long piece of fabric, I’d leave both ends open to allow for gathering on both sides).IMG_1908

Then, on the end where the ribbon has not been reinforce stitched down, you’ll slide the fabric over the ribbon. It works beautifully!IMG_1911

Pull to desired fullness or length. I then, like to reinforce stitch the open ribbon end so that my gathers don’t move (if I’m gathering a really long piece of fabric I don’t worry about backstitching over either end of the ribbon because I may need to adjust my gathers, for instance, if I’m sewing a gathered skirt to a fitted bodice).

IMG_1914

And, the final method is gathering by serger, used for lightweight to medium weight fabric (you can actually gather heavy fabric with a jeans thread similar to the above method with a serger using an elastic foot, too, but, that is not illustrated in this tutorial). I used my Baby Lock Evolution Serger to gather; you can do this method with the other Baby Lock Sergers, too!!

Gathering with a Serger

IMG_1950

This method would make this Table Runner Tutorial a lot quicker! The above photo shows that I have set my differencial feed to the highest it will go to 2.0. Then, set your stitch length to the highest it will go to 4 (on the Baby Lock Sergers). The stitch width should be normal (M-7.5 on Baby Lock Sergers; mine was set at M or 3.5) and your needle tension, if you have it, should be at 5 (standard setting). Your blade is not locked down.

IMG_1951

Place your fabric at the front of the foot, press your foot pedal so that it will pull your fabric underneath and you’re on your way! Don’t pull the fabric feeding behind the foot; if anything, you can try placing your finger near the back of the foot on the fabric that is feeding out (releasing from time to time to allow for fabric movement) to encourage more gathers. As you can see below, the fabric has already begun gathering.

IMG_1952

So cool! And fun!

IMG_1953

It serges a pretty nice gather (as soon as I get the ruffling foot for my Baby Lock Serger, I’ll give you feedback on how much more it gathers), but, if you need more fullness, you can adjust…

IMG_1954

If you look at your cut serger thread tail, the 2 threads that are shorter should be your needle threads (you might stitch with 2 needle threads that are a different color to be able to tell better). My thread tail is shown below, one shorter thread is red and one is white. You can pull the 2 shortest threads and gather more fullness into your  fabric!

IMG_1955

I was able to get a lot more fullness into my fabric!

IMG_1957

Hope this was helpful! If you have any questions, extra tips, or something was unclear, kindly leave a comment! Show us your gathered projects and the gathering method that you used by posting a picture to our Totally Stitchin’ Facebook Page!!!!!! We love to see what you’re creating!

Totally Stitchin’ Tutorials that involve gathering (click on the picture to link to the tutorial)

 

 

 

 

 

 

Above picture provided by Jheart Photography

 

This one actually shows gathering by hand:

 

 

This swimsuit involves a little bit of gathering:

 

 

 

Comments are closed.

Skip to toolbar